OK, I don't want to be a wet blanket here but... the Tech Staff is good at this kind of stuff, but if I remember correctly, the one time he did this, we eventually realized the toilet was leaking and had to call a plumber to re-do it. So, maybe keep an eye on it. You don't expect to do most things perfectly the first time, right?
Dad checked it out. In fact, he came by because after the whole thing was installed and we turned the valve back on, the *valve* started leaking. So he had to come replace the valve for me because I don't know how to solder (yet). No leaks on the toilet proper, though. And Dad would know.
ALSO: Jay-Ell? You have been adopted in the man conversation clubhouse by your Pap. Congratulations on your honorary weiner. Actually, a lot of men conversate best through the projects they've been up to and your pater was complimenting you. I'm glad you recognized it.
But if you want to stay in the club you can't play false modesty all the way. At some point you need to tell an under-emphasized no-big-deal tone story about one of the problems you overcame with the project. Then he can relate his experiences with that kind of stuff and maybe you guys can go crack a brew an chew the fat.
Well, the new toilet actually came about because I was trying to repair the old one. I took the whole thing apart so that I could get to the gasket that seals the tank to the bowl, but the bolts were so rusted (and, of course, I didn't get new ones because they cost a whole $1.50) that I couldn't get it back together. By this time, the hardware store was closed, so I had to leave it for morning, and by then I'd been able to convince my spouse that if we were going to replace every bolt, nut, washer, and gasket in an effort to get this thing to stop leaking (I had already replaced the flapper and seal), we may as well spring for a new unit and save ourselves 3 gallons per flush as well.
The modestly isn't false, BTW. I have a really hard time accepting compliments, generally. "Nice dress," my friend will say. "Oh, this? I got it off the clearance rack at Kohl's last fall."
Also, the bolts *WERE* so rusted that I couldn't get them unscrewed, so I just took a pair of channel locks and broke them off at the base. (Note to self: buy a hacksaw.)
Next up: GFCI!